Skip to content

Blog

Calculation and analysis focused posts

Short pieces for manual calculation, visual analysis, and methodical notes.

Torqyx Engineering - Blog Hero
FastenersJun 29, 2026|5 min read

Bolt Property Classes: Understanding 8.8, 10.9, and 12.9 Fasteners

Compare metric bolt grades 8.8, 10.9, and 12.9: tensile strength, yield behavior, ductility, and engineering selection criteria.

#bolt property classes#fasteners#bolted joints#mechanical calculation
BoltsJun 28, 2026|6 min read

What is Bolt Preload Force and Why is it Critical?

Understand bolt clamp load, why torque does not equal preload, the physics of bolted joints, and how to size tightening preload safely.

#bolt preload#fasteners#bolted joint#engineering calculation
BoltsJun 27, 2026|6 min read

Metric vs Imperial Thread Pitch: How to Identify and Select Fasteners

Understand the mathematical differences between ISO metric pitch (mm) and Unified inch TPI, compare UNC vs UNF, and avoid catastrophic cross-threading.

#metric vs inch thread#threads per inch#UNC#UNF
Torque & DrivetrainJun 26, 2026|5 min read

How to Correctly Use a Torque Wrench: Assembly, Calibration, and Best Practices

Learn the proper technique for using a torque wrench: range selection, gradual multi-stage tightening, cross patterns, calibration, and storage.

#torque wrench best practices#bolt tightening#fastener preload#bolted joint assembly
BoltsJun 25, 2026|6 min read

5 Root Causes of Bolt Loosening and Engineering Solutions

Understand the mechanics of bolt self-loosening under vibration, embedment settling, clamp load decay, thermal cycling, and proper VDI 2230 prevention.

#bolt loosening#fasteners#bolted joint#vibration loosening
FastenersJun 24, 2026|5 min read

DIN 931 vs DIN 933: Partial Thread vs Full Thread Hex Bolts

Understand the critical differences between DIN 931 (partially threaded) and DIN 933 (fully threaded) hex head bolts for shear and tension joints.

#DIN 931 DIN 933 difference#bolts#standards#mechanical engineering
BoltsJun 23, 2026|6 min read

Stainless Steel vs Galvanized Bolts: Material Selection Guide

Compare stainless steel (A2-70, A4-80) and galvanized carbon steel fasteners across corrosion life, mechanical strength, galling risks, and cost.

#stainless steel bolts#galvanized fasteners#corrosion resistance#bolted joint
GearsJun 22, 2026|5 min read

What is Gear Module? Sizing and Selection Guide

Master metric gear module sizing: understand the m = d/z relationship, standard module series (ISO 54 / DIN 780), bending strength, and undercut limits.

#gear module#gear design#spur gear#mechanical engineering
GearsJun 21, 2026|5 min read

Spur Gears vs Helical Gears: Mechanical Differences, Loads, and Selection Guide

Compare spur and helical gears: tooth contact mechanics, acoustic performance, axial thrust loads, manufacturing complexity, and bearing selection.

#spur gear vs helical gear#gear design#thrust loads#noise vibration
GearsJun 20, 2026|5 min read

Gear Ratio Calculation: A Step-by-Step Engineering Guide

Learn how to calculate gear ratio from teeth count, angular velocity, and torque; understand direction reversal, multi-stage gear trains, and mechanical efficiency.

#gear ratio calculation#gear design#speed reducer#mechanical transmission
GearsJun 19, 2026|5 min read

Chain Drives, Belt-Pulley Systems, or Gearboxes? Mechanical Drive Comparison

Compare roller chains, V-belts, timing belts, and enclosed gearboxes: center distances, mechanical efficiency, maintenance, slip, and lifecycle costs.

#chain drive vs belt drive#gearbox vs chain drive#mechanical power transmission#belt drive sizing
GearsJun 18, 2026|6 min read

6 Design Mistakes That Slash Gearbox Lifetime

Discover the critical gear design mistakes—underestimating application service factor, pinion undercut, lubrication starvation, backlash, and shaft deflection.

#gear design mistakes#gears#gearbox design#engineering calculation
GearsJun 17, 2026|5 min read

What Is an Involute Gear Profile? Why Did It Become the Universal Standard?

Explore the geometry of the involute gear tooth profile: conjugate action, center distance insensitivity, pressure angle selection, and tooling standardization.

#involute gear profile#gear design#conjugate action#pressure angle
Torque and TransmissionJun 16, 2026|5 min read

The Difference Between Torque and Power: An Engineering Perspective

Understand the fundamental relationship between torque and power, P = T x omega, and how to size electric motors and gear reducers correctly.

#torque and power difference#torque and transmission#engineering calculation
Torque & DrivetrainJun 15, 2026|5 min read

How to Read an Electric Motor Torque-Speed Curve

Learn how to read motor torque-speed curves: nominal, peak, breakdown, and locked-rotor torque; match motor capabilities with dynamic load curves.

#motor torque speed curve#electric motor sizing#torque calculation#motor selection
Torque & PowerJun 14, 2026|5 min read

Shaft Sizing: Torsional Stress and Angle of Twist

Pre-size a solid shaft from torque, allowable shear stress, and angle of twist. Understand why torsion is only the starting point—not the whole design.

#shaft design#torsional stress#torque transmission
GearsJun 13, 2026|5 min read

5 Critical Criteria for Selecting an Industrial Gear Reducer

Master industrial gearbox selection: transmission ratio, continuous and peak torque, service factors, thermal limits, and overhung radial loads.

#gearbox selection#speed reducer#service factor#gear design
FastenersJun 12, 2026|5 min read

What Is the Nut Factor (K Factor) in Bolted Joint Calculations?

Understand the torque coefficient (K-factor) in bolted joints: friction energy distribution, coating effects, lubrication variables, and preload calculation.

#nut factor K factor#torque coefficient#bolted joints#bolt tightening
Bearings & ShaftsJun 11, 2026|5 min read

What is L10 Bearing Life and How is it Calculated?

Understand 90% reliability L10 bearing life, the governing ISO 281 formula, dynamic capacity C, equivalent load P, and L10h operating hours.

#L10 bearing life#bearings and shafts#bearing selection#mechanical calculation
Bearings & ShaftsJun 10, 2026|5 min read

Ball Bearings vs. Roller Bearings: Sizing and Selection Criteria

Compare ball and roller bearings across radial load, axial thrust, rotational speed, misalignment tolerance, boundary lubrication, and ISO 281 L10 life.

#ball bearings#roller bearings#bearing selection#machine elements
Bearings & ShaftsJun 9, 2026|5 min read

Bearing Fits and Tolerances: The ISO 286 Engineering Guide

Learn how to select ISO 286 shaft and housing fits for rolling bearings: rotating ring rules, internal clearance reduction, and thermal considerations.

#bearing fits ISO 286#shaft tolerance#housing fits#bearing clearance
Bearings & ShaftsJun 8, 2026|5 min read

Shaft-Hub Connections: Keyed, Flanged, and Interference Fit Comparison

Compare keyed, flanged, and press-fit shaft-to-hub connections: torque transmission limits, notch effects, disassembly, and concentricity.

#shaft-hub connection#keyed joint#interference fit#flange connection
Bearings & ShaftsJun 7, 2026|5 min read

Dynamic and Static Load Ratings: What Do C and C0 Values Mean?

Understand the critical differences between C and C0 in bearing catalogs: fatigue life calculations, plastic indentation limits, and static safety.

#dynamic load rating C#static load rating C0#bearing selection#mechanical calculation
FluidsJun 6, 2026|5 min read

Darcy-Weisbach Equation: Calculating Pipe Pressure Drop

Calculate frictional pressure loss in pipes using the Darcy-Weisbach formula, Reynolds number, relative roughness, and Colebrook-White friction factor.

#Darcy-Weisbach equation#pipe flow#fluid dynamics#pressure drop
FluidsJun 5, 2026|5 min read

How to Calculate Hydraulic Cylinder Force and Speed

Calculate push and pull forces for hydraulic cylinders using pressure, bore diameter, and rod diameter. Account for mechanical efficiency and buckling safety.

#hydraulic cylinder force#cylinder sizing#hydraulics#mechanical engineering
FluidsJun 4, 2026|5 min read

What is Reynolds Number? Laminar vs. Turbulent Flow Regimes

Understand the dimensionless Reynolds number formula Re = rho v D / mu and the physics distinguishing laminar, transitional, and turbulent pipe flow.

#Reynolds number explained#fluid mechanics#pipe flow#mechanical calculation
FluidsJun 3, 2026|6 min read

Balancing Velocity and Pressure Drop in Pipe Sizing

A practical engineering guide to sizing pipe diameters by balancing volumetric flow, target fluid velocity, friction head loss, and lifecycle operating costs.

#pipe sizing#fluids#pressure loss#engineering calculation
Engineering MethodsJun 2, 2026|5 min read

Differences Between ISO, DIN, and VDI Standards: Which Standard When?

Understand the roles of ISO, DIN, and VDI standards in mechanical engineering: international harmonization, national norms, and calculation guidelines.

#ISO DIN VDI differences#engineering standards#standardization#mechanical design
Engineering MethodsJun 1, 2026|6 min read

How to Determine the Factor of Safety in Engineering Calculations

A methodical guide to selecting structural factors of safety based on failure modes, loading uncertainties, material tolerances, and ASME/ISO standards.

#factor of safety#engineering methods#stress calculation#ASME
Engineering MethodsMay 31, 2026|5 min read

7 Dangerous Risks of Using Excel for Mechanical Engineering Calculations

Examine common spreadsheet risks in mechanical design: unit errors, broken formulas, version sprawl, unvalidated inputs, and lack of QA audit trails.

#Excel engineering risks#spreadsheet calculation errors#mechanical engineering QA#design validation
FastenersMay 19, 2026|10 min read

Bolt Preload and Tightening Torque Guide: VDI 2230 Systematic Calculation

Engineering guide on calculating bolt clamp preload F_M, tightening torque M_A, thread friction, embedment settling losses, and joint slip under VDI 2230.

#bolt calculation#preload#VDI 2230#tightening torque
StandardsMay 18, 2026|6 min read

ISO 898-1 Fastener Standards: Property Classes and Mechanical Properties

A comprehensive engineering guide to ISO 898-1 metric bolt property classes (8.8, 10.9, 12.9), tensile and yield strength formulas, and nut matching rules.

#ISO 898-1#bolts#fasteners#property classes
Machine ElementsMay 17, 2026|11 min read

Bearing Life (L10) and Dynamic Load Rating Guide: ISO 281 Standard

Engineering guide on calculating basic L10 and L10h rating life, dynamic equivalent load P, a_ISO modified life factors, and lubrication film analysis under ISO 281.

#bearing life#L10 calculation#ISO 281#dynamic load rating
FluidsMay 16, 2026|3 min read

Pipe Pressure Loss Calculation with the Darcy-Weisbach Equation

A step-by-step engineering guide to calculating Darcy-Weisbach pipe head loss, friction factors, and hydraulic sizing under ISO/DIN standards.

#Darcy-Weisbach#pressure loss#fluid dynamics#piping
ProductivityMay 15, 2026|4 min read

Excel vs. TORQYX: Choosing the Right Calculation Workflow for Mechanical Engineers

Compare spreadsheet flexibility against purpose-built engineering calculation platforms: auditability, ISO/DIN compliance, unit safety, and team velocity.

#Excel vs TORQYX#mechanical calculation software#engineering productivity#standardized calculation
EngineeringMar 28, 2026|8 min read

Engineering Calculation Workflows

Key steps to regularly track engineering calculation workflows.

#calculation#workflow#engineering