Last updated: November 2026
Scope and Limitations of Use
All calculation tools on the TORQYX platform are developed for the preliminary sizing and feasibility phase of the mechanical engineering design process. Results obtained from these tools serve as guidance for conceptual design, initial selection, and engineering discussions.
Calculation results must not be used as final design data, manufacturing documentation, or structural approval documents. For safety-critical components, pressure vessels, lifting equipment, load-bearing structures, and all applications that directly affect human safety, compliance with applicable standards and approval by a competent engineer are mandatory.
Engineering Judgment Requirement
Every engineering calculation contains conditions specific to the project context (material property tolerances, actual loading conditions, environmental effects, fatigue history, assembly errors, etc.). TORQYX tools cannot know this project context; they process user-provided values and produce deterministic output.
Users are required to evaluate TORQYX outputs within the framework of their own engineering judgment, project requirements, and applicable standards, verify them, and decide on their applicability.
Even simple mistakes (wrong unit selection, incorrect loading scenario, neglecting a safety factor) can lead to serious consequences in real applications. Therefore TORQYX outputs must always be reviewed and approved by a qualified engineer.
Standards Compliance Verification
TORQYX references international standards (ISO, DIN, Eurocode, ASME, VDI, etc.) in many calculations and applies their formulas. However, standards are regularly updated; users must independently verify the current standard edition and any additional requirements of local regulations.
Some calculators contain cases where simplifications are made or where the scope of the standard is exceeded; these cases are explicitly noted on the relevant tool page. Users are obligated to take these warnings into account.
Disclaimer of Liability
TORQYX and its content providers cannot be held liable for any direct, indirect, incidental, special, or consequential damages (including but not limited to loss of profit, production downtime, structural damage, personal injury) arising from the use of calculation tools on this platform.
While the platform exercises reasonable care regarding the accuracy and currency of content, it does not warrant fitness for a particular purpose or freedom from errors. Users agree to use the tools at their own risk.
This disclaimer does not limit or exclude any legal rights you have under applicable consumer protection or product liability legislation.
Contact and Reporting
If you detect an error or inconsistency in calculation results, please report it through our contact page. Every report is reviewed within 10 business days and corrections are made where necessary.
The current version of this disclaimer is always published on this page.
