Guides
Step-by-step calculation and application guides
Practical notes for material selection, quality checks, and production flows.

Fluid Mechanics and Pipe Flow Guide: Laminar, Turbulent, Reynolds, and Cavitation
Comprehensive engineering guide on flow regimes (Laminar vs Turbulent), Reynolds number, Darcy-Weisbach head loss, Colebrook-White equation, and pump NPSH cavitation.
Pump selection guide: centrifugal vs positive displacement
Comparison of centrifugal and positive displacement pumps, hydraulic power sizing, NPSH calculations, and cavitation prevention engineering guide.
Viscosity classification and lubricant selection guide
Engineering notes for selecting ISO VG, SAE, and AGMA viscosity grades correctly based on operating temperature, speed, and application. ISO 3448 and DIN 51519 referenced.
Helical Compression Spring Design and Force-Deflection Guide: EN 13906-1
Comprehensive engineering guide on helical compression spring rate k, deflection, Wahl stress correction, solid length, and fatigue limits under EN 13906-1.
Key design 101: parallel keys and mechanical wedges
DIN 6885 shaft-hub parallel keys, shear and bearing crushing stress verification, wedge mechanics, and self-locking conditions.
Machine element life, S-N Wöhler curves, and fatigue guide
High-cycle fatigue analysis, S-N Wöhler curves, Marin modification factors, Goodman failure criterion, and Miner cumulative damage rule.
Bearing selection engineering guide
Systematic bearing selection guide combining load type, speed, temperature, and service conditions with ISO 281 L10 life calculation. SKF, FAG, and ISO 15312 referenced.
Manufacturing Technologies and CNC Machining Guide: Speeds, Feeds, and Taylor Tool Life
Engineering guide on CNC turning and milling cutting speed Vc, feed per tooth fz, MRR chip volume, Taylor tool life equations, and precision grinding under ISO 3685.
Welded design safety and cost balance
Engineering evaluation of load path, inspection methods, distortion, and cost when choosing fillet or full-penetration welds. AWS D1.1 and EN 1993 referenced.
Surface finishing and coating engineering guide
Hot-dip galvanizing, hard anodizing, hard chrome, electroless nickel, corrosion protection, coating tolerance stack-up, and hydrogen embrittlement guide.
Engineering Materials Selection and Mechanical Properties Guide: ISO 6892-1 and ASTM E8
Comprehensive guide on tensile strength, yield strength, Young's modulus, ductility, Hooke's Law, and materials selection matrices under ISO 6892-1 and EN 10083.
Corrosion resistance and stainless steel selection
Engineering guide comparing 304, 316, 321, and martensitic stainless steels for chloride, temperature, welding, and cleaning chemical environments. ASTM A240 and EN 10088 referenced.
Titanium alloys engineering guide: Ti-6Al-4V and pure titanium
Ti-6Al-4V Grade 5 and CP titanium mechanical properties, specific strength, CNC machining parameters, elastic modulus, and corrosion resistance guide.
Geometric Dimensioning and Tolerancing (GD&T) Guide: ASME Y14.5 and ISO 1101
Engineering guide on GD&T symbols, Datum Reference Frames (3-2-1 rule), Circular and Total Runout, Concentricity vs Position, and MMC bonus tolerances.
Tolerance Stack-up Analysis Guide: Worst-Case and Statistical RSS Methods
Engineering guide on 1D/2D tolerance stack-up analysis: Worst-Case, Root Sum of Squares (RSS), Six Sigma limits, and process capability (Cp, Cpk) under ASME Y14.5.