Skip to content

Blog

Calculation and analysis focused posts

Short pieces for manual calculation, visual analysis, and methodical notes.

Torqyx Engineering - Blog Hero
FastenersJun 29, 2026|5 min read

Bolt Property Classes: Understanding 8.8, 10.9, and 12.9 Fasteners

Compare metric bolt grades 8.8, 10.9, and 12.9: tensile strength, yield behavior, ductility, and engineering selection criteria.

#bolt property classes#fasteners#bolted joints#mechanical calculation
FastenersJun 24, 2026|5 min read

DIN 931 vs DIN 933: Partial Thread vs Full Thread Hex Bolts

Understand the critical differences between DIN 931 (partially threaded) and DIN 933 (fully threaded) hex head bolts for shear and tension joints.

#DIN 931 DIN 933 difference#bolts#standards#mechanical engineering
FastenersJun 12, 2026|5 min read

What Is the Nut Factor (K Factor) in Bolted Joint Calculations?

Understand the torque coefficient (K-factor) in bolted joints: friction energy distribution, coating effects, lubrication variables, and preload calculation.

#nut factor K factor#torque coefficient#bolted joints#bolt tightening
FastenersMay 19, 2026|10 min read

Bolt Preload and Tightening Torque Guide: VDI 2230 Systematic Calculation

Engineering guide on calculating bolt clamp preload F_M, tightening torque M_A, thread friction, embedment settling losses, and joint slip under VDI 2230.

#bolt calculation#preload#VDI 2230#tightening torque