Module Calculator
ActiveModule recommendation and checks based on gear size, tooth count, and quality.
Each calculator has its own card. The “Use” button opens that tool page where you can start calculations and add notes or visuals if needed.
Module recommendation and checks based on gear size, tooth count, and quality.
Ratio, rpm, and torque relation from z1/z2 or d1/d2.
Calculates Ft = 2·T/d (Ft = 2000·T/d for T in N·m and d in mm) plus Fr/Fa components.
Calculates Fa using helix and pressure angles; bearing load estimate.
Estimates contact sequence with e_alpha + e_beta (profile + overlap).
ISO VG and lubrication method recommendation from ks and v values.
Weight and savings estimate using geometry + pocket/rib data.
Min/nom/max backlash with module, center distance, and temperature input.
Guides
Browse guides with similar tags.
High-cycle fatigue analysis, S-N Wöhler curves, Marin modification factors, Goodman failure criterion, and Miner cumulative damage rule.
Glossary
Terms that share the same concepts as this calculator.
Definition, engineering formulas, calculation methods, and tolerance criteria for gear tooth backlash under ISO 21771 and AGMA standards.
Similar calculators
Explore calculators with similar categories or tags.
Calculate stress area and preload from nominal diameter, pitch, and grade.
Compute gear torque and transmitted forces.
Compute torsional stress and twist angle from torque and shaft size.
Compute torque or power from kW, hp, and rpm.