Skip to content
Calculator tabs

Backlash Calculator

Estimates min/nom/max backlash from module, face width, center distance, and temperature delta (simple guide).

Backlash Calculator

Estimates min/nom/max backlash from module, face width, center distance, and temperature delta (simple guide).

Active
Min backlash j_min [mm]0.088 mm
Nominal backlash j_nom [mm]0.110 mm
Max backlash j_max [mm]0.132 mm
Thermal correction Δa [mm]0.0180 mm
Nominal (after ΔT)0.128 mm
Min/Max (after ΔT)0.106 / 0.150 mm

Engineering Advisor

Smart checks, ranges, and next-step suggestions based on your inputs.

No advisor notes yet. Adjust inputs to see checks and suggestions.

This is a simplified estimate aligned with ISO/DIN guidance. Check tolerance class tables and drawings for final design.

Guides

Related guides

Browse guides with similar tags.

Geometric Dimensioning and Tolerancing (GD&T) Guide: ASME Y14.5 and ISO 1101

Tolerances

Engineering guide on GD&T symbols, Datum Reference Frames (3-2-1 rule), Circular and Total Runout, Concentricity vs Position, and MMC bonus tolerances.

Press-fit tolerance selection and interference fit calculation

Tolerance

ISO 286 tolerance classes, DIN 7190 contact pressure, Lamé thick-walled cylinder equations, assembly press force, and shrink-fit thermal sizing.

Glossary

Related terms

Terms that share the same concepts as this calculator.

Backlash in Gear Systems

Glossary

Definition, engineering formulas, calculation methods, and tolerance criteria for gear tooth backlash under ISO 21771 and AGMA standards.

Similar calculators

Related calculators

Explore calculators with similar categories or tags.

Bolt Size & Torque

Free

Calculate stress area and preload from nominal diameter, pitch, and grade.

Gear Force & Torque

Free

Compute gear torque and transmitted forces.

Shaft Torsion

Free

Compute torsional stress and twist angle from torque and shaft size.

Power - Torque - RPM

Free

Compute torque or power from kW, hp, and rpm.