Viscosity classification and lubricant selection guide
Engineering notes for selecting ISO VG, SAE, and AGMA viscosity grades correctly based on operating temperature, speed, and application. ISO 3448 and DIN 51519 referenced.
Recommends ISO VG based on ks/v factor and lubrication method; adjusted by speed and temperature.
Recommends ISO VG from ks/v and lubrication method. At high speed with jet/spray, lower VG may be selected; for high ks and low speed, higher VG may be needed.
The ks/v approach is aligned with DIN/ISO-style lubrication selection logic. For high speed with spray/jet, one lower VG may be chosen; for splash/oil bath with high ks and low speed, one higher VG may be chosen. If temperature is above 85 °C, prefer one higher VG. Use your own detailed tables for final selection.
Guides
Browse guides with similar tags.
Engineering notes for selecting ISO VG, SAE, and AGMA viscosity grades correctly based on operating temperature, speed, and application. ISO 3448 and DIN 51519 referenced.
Similar calculators
Explore calculators with similar categories or tags.
Calculate stress area and preload from nominal diameter, pitch, and grade.
Compute gear torque and transmitted forces.
Compute torsional stress and twist angle from torque and shaft size.
Compute torque or power from kW, hp, and rpm.