Bolt Size & Torque
Free
Calculate stress area and preload from nominal diameter, pitch, and grade.
Calculator tabs
← All calculatorsModules
Module Calculator
Calculates raw module from pitch diameter and tooth count, then suggests nearest standard module and recommended diameter.
Module Calculator
Enter pitch diameter (d) and tooth count (z), calculate raw module, and see nearest standard module with recommended diameter.
Raw module m5.000 mm
Pitch (π·m)15.708 mm
Suggested standard m5.000 mm
Suggested diameter (m_std·z)200.00 mm
Standard deviation+0.0 %
Approximate undercut pre-checkAbove threshold
Engineering Diagram
Schematic view based on pitch diameter and tooth count.
Preview
PNG export is report-ready.
Recommendation subset from the ISO 54 module series: 0.5, 0.6, 0.8, 1, 1.25, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, 12, 16, 20. It is shown separately from raw m=d/z. The z<17 warning is only an approximate pre-check for a 20° standard full-depth external gear with no profile shift. ISO 54:1996
Similar calculators
Related calculators
Explore calculators with similar categories or tags.
Tolerance Lab
Free
Analyze linear tolerance stacks with worst-case, RSS, and sensitivity contribution views.
Spring Force Chart
Free
Generate an F-x chart from spring constant and displacement.
Tensile Stress
Free
Compute tensile stress from force and cross-section area.
Other picks
These might help too
Review alternative calculators for adjacent needs.
Power - Torque - RPM
Free
Compute torque or power from kW, hp, and rpm.
Shaft Torsion
Free
Compute torsional stress and twist angle from torque and shaft size.
Gear Force & Torque
Free
Compute gear torque and transmitted forces.
Unit Converter
Free
Fast unit conversions for length, force, pressure, and energy.