Skip to content
Calculator tabs
Machine ElementsMulti-Calculator

Machine Elements Fast Pack

Three essential mechanical component checks: (1) rolling bearing ISO 281 L10 life in hours/revolutions, (2) parallel keyway shear and surface bearing stress, and (3) spur gear pitchline tangential and radial tooth forces. Preliminary sizing approximations.

1) Rolling Bearing L10 Life (ISO 281)

Rating life L10 (revs)125000000 rev
Rating life L10h (hours)1388.9 h

Note: Exponent p=3 assumed (ball bearings; for roller bearings p=10/3). Adjust for operating temperature, lubrication viscosity ratio (κ), and ISO 281 life factors (aISO) for detailed design.

2) Parallel Keyway Shear & Crushing Stress

Transmitted force F9000 N
Shear stress τ15.0 MPa
Crushing stress σ45.0 MPa
Safety factor (shear / bearing)6.67 / 4.44

Note: Simplified check according to DIN 6885. Include service factor (Ka) and chamfer allowance for real hub and keyway fits.

3) Spur Gear Pitchline Forces (Ft, Fr)

Pinion torque T136.2 Nm
Tangential load Ft604 N
Radial separating load Fr220 N
Output speed n2483 rpm

Note: Nominal force estimation at pitch line. Complete ISO 6336 or AGMA 2001 ratings require dynamic factor (Kv), face load factor (KHβ), and surface durability calculation.

Machine Elements Visual Gallery

Visual engineering reference of standard machine elements

Bolts & Threaded Fasteners

Bolts & Threaded Fasteners

ISO/DIN structural bolts, studs, and heavy hex nuts

Gears & Transmission

Gears & Transmission

Spur, helical, bevel, and worm gear power train elements

Bearings & Housings

Bearings & Housings

Deep groove, angular contact, tapered, and spherical roller bearings

Belts & Pulleys

Belts & Pulleys

V-belt, timing belt, and flat belt synchronous drive systems

Pins & Springs

Pins & Springs

Dowel pins, coil compression springs, and Belleville washers

Power Screws & Threading

Power Screws & Threading

Lead screws, ball screws, and trapezoidal metric threads

Shafting & Bushings

Shafting & Bushings

Precision ground shafting, plain sleeve bushings, and pillow blocks

Guides

Related guides

Browse guides with similar tags.

Machine element life, S-N Wöhler curves, and fatigue guide

Machine Elements

High-cycle fatigue analysis, S-N Wöhler curves, Marin modification factors, Goodman failure criterion, and Miner cumulative damage rule.

Key design 101: parallel keys and mechanical wedges

Machine Elements

DIN 6885 shaft-hub parallel keys, shear and bearing crushing stress verification, wedge mechanics, and self-locking conditions.

Bearing selection engineering guide

Machine Elements

Systematic bearing selection guide combining load type, speed, temperature, and service conditions with ISO 281 L10 life calculation. SKF, FAG, and ISO 15312 referenced.

Similar calculators

Related calculators

Explore calculators with similar categories or tags.

Bearing Life (L10)

Free

Calculate L10 and L10h from C, P, type, and rpm.

Pulley Belt Length and Wrap Angle

Free

Calculate open belt length, small pulley wrap angle, and tension allowance checks from pulley diameters and center distance.

Bending & Deflection

Free

Bending stress and max deflection for a simply supported beam.

Bolt Size & Torque

Free

Calculate stress area and preload from nominal diameter, pitch, and grade.