Skip to content
Calculator tabs
Heat Transfer & EnergyMulti-Calculator

Heat Transfer & Energy Fast Pack

Three essential thermal & renewable calculations: (1) heat exchanger area sizing with LMTD (Log Mean Temperature Difference), (2) 1D conduction & combined convection heat loss, and (3) solar photovoltaic power estimation with cell temperature derating. Engineering preliminary sizing approximations.

1) Heat Exchanger Sizing (LMTD)

ΔT1 = Th,in - Tc,out50.0 K
ΔT2 = Th,out - Tc,in50.0 K
LMTDNaN K
Exchanger area ANaN m²

Note: Pure counterflow assumed. Crossflow correction factor (F) and phase-change variable U are not modeled; intended for preliminary engineering sizing.

2) 1D Conduction + Convection Heat Loss

Rtotal0.0535 K/W
Heat loss rate q467.3 W
Rconduction0.0500 K/W
Rconvection (in / out)0.0025 / 0.0010 K/W

Note: 1D planar wall model. Thermal bridging at corners, radiation exchange, and multi-layer wall assemblies require detailed composite thermal analysis.

3) Photovoltaic Array Sizing & Derating

Derated efficiency η16.42 %
Array power output P4.68 kW

Note: DC array estimate. Inverter conversion efficiency, soiling, shading, cabling voltage drop, and sun incident angle modifier (IAM) are excluded.

Guides

Related guides

Browse guides with similar tags.

Thermal and Electrical Systems Guide: Thermal Expansion, Joule Heating, and Stress Analysis

Thermal

Engineering guide on linear thermal expansion, constrained thermal stress, Euler pipe buckling, electrical busbar Joule heating, and IEC 60947 compliance.

Similar calculators

Related calculators

Explore calculators with similar categories or tags.

Basic Heat Flow

Free

Estimate heat flow through a single layer with manual inputs.

Coating Guide

Free

Summary of coating types and corrosion protection.

Fluids & HVAC

Free

Quick calculations for Reynolds, pressure loss, and duct velocity.

Heat Treatment

Free

Heat treatment steps and quality control notes.