Skip to content
Calculator tabs
Heat TreatmentMaterial Selector

Heat Treatment Selection Guide

Select the alloy family and primary engineering requirement to view recommended heat treatment processes, metallurgical effects, and shop-floor design tips. Reference guidance only; verify with standard specs and heat treaters.

Parameters

Design Tip: For tight tolerances and low distortion, prioritize diffusion-based or subcritical treatments (nitriding, stress relief). For localized wear resistance choose induction hardening or carburizing; for corrosion choose solution annealing or precipitation hardening.

Recommended Heat Treatment Processes

Normalizing

Heating above Ac3 followed by still-air cooling; refines grain size and restores uniform microstructure.

Typical applications: Forged or hot-rolled parts (AISI 1045, S355) before machining.

Quench and Temper (Q&T / Through Hardening)

Austenitizing followed by rapid cooling (oil/water/polymer) to martensite, followed by tempering for strength and toughness balance.

Target hardness is controlled by temper temperature. Generous corner radii are critical to prevent quench cracks.

Vacuum Hardening

Heating in a vacuum chamber with high-pressure nitrogen quenching; avoids decarburization and minimizes dimensional distortion.

Typical applications: Tool and die steels (H13, AISI D2, P20) and high-precision bearing components.

Austempering (Bainitic Hardening)

Isothermal quenching in molten salt to produce a tough bainitic structure without entering the martensite start range.

Widely used for Austempered Ductile Iron (ADI) providing exceptional toughness and fatigue limits.

Guides

Related guides

Browse guides with similar tags.

Engineering Materials Selection and Mechanical Properties Guide: ISO 6892-1 and ASTM E8

Materials

Comprehensive guide on tensile strength, yield strength, Young's modulus, ductility, Hooke's Law, and materials selection matrices under ISO 6892-1 and EN 10083.

Surface finishing and coating engineering guide

Manufacturing

Hot-dip galvanizing, hard anodizing, hard chrome, electroless nickel, corrosion protection, coating tolerance stack-up, and hydrogen embrittlement guide.

Similar calculators

Related calculators

Explore calculators with similar categories or tags.

Basic Heat Flow

Free

Estimate heat flow through a single layer with manual inputs.

Coating Guide

Free

Summary of coating types and corrosion protection.

Fluids & HVAC

Free

Quick calculations for Reynolds, pressure loss, and duct velocity.

Heat Transfer & Energy

Free

Basics for LMTD, conduction, and energy estimates.