Skip to content
Calculator tabs

Module Calculator

Calculates raw module from pitch diameter and tooth count, then suggests nearest standard module and recommended diameter.

Module Calculator

Enter pitch diameter (d) and tooth count (z), calculate raw module, and see nearest standard module with recommended diameter.

Active
Raw module m5.000 mm
Pitch (π·m)15.708 mm
Suggested standard m5.000 mm
Suggested diameter (m_std·z)200.00 mm
Standard deviation+0.0 %
Approximate undercut pre-checkAbove threshold

Engineering Diagram

Schematic view based on pitch diameter and tooth count.

Preview

PNG export is report-ready.

Module m = 5.000 mmPitch diameter d = 200.00 mmTooth count zz = 40

Recommendation subset from the ISO 54 module series: 0.5, 0.6, 0.8, 1, 1.25, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, 12, 16, 20. It is shown separately from raw m=d/z. The z<17 warning is only an approximate pre-check for a 20° standard full-depth external gear with no profile shift. ISO 54:1996

Guides

Related guides

Browse guides with similar tags.

Machine element life, S-N Wöhler curves, and fatigue guide

Machine Elements

High-cycle fatigue analysis, S-N Wöhler curves, Marin modification factors, Goodman failure criterion, and Miner cumulative damage rule.

Glossary

Related terms

Terms that share the same concepts as this calculator.

Backlash in Gear Systems

Glossary

Definition, engineering formulas, calculation methods, and tolerance criteria for gear tooth backlash under ISO 21771 and AGMA standards.

Similar calculators

Related calculators

Explore calculators with similar categories or tags.

Bolt Size & Torque

Free

Calculate stress area and preload from nominal diameter, pitch, and grade.

Gear Force & Torque

Free

Compute gear torque and transmitted forces.

Shaft Torsion

Free

Compute torsional stress and twist angle from torque and shaft size.

Power - Torque - RPM

Free

Compute torque or power from kW, hp, and rpm.