Bolt head types guide
Engineering comparison of hex, socket head, button head, and countersunk bolts for design, assembly, torque capacity, and service requirements. ISO 4762, ISO 4014, and DIN 931 referenced.
Major Diameter: 3.00 mm
Pitch / TPI: 0.50
Tapping Drill Size: 2.5 mm
Tensile Strength: 800 MPa
Yield Strength: 640 MPa
Hardness: 22–34 HRC
Toughness & Application: Medium strength, general structural fasteners
M3 bolts are typically sourced in these property classes:
Note: Data is provided for general engineering reference. Check relevant ISO/DIN/ASME standards and fastener supplier catalogs for critical engineering designs.
Guides
Browse guides with similar tags.
Engineering comparison of hex, socket head, button head, and countersunk bolts for design, assembly, torque capacity, and service requirements. ISO 4762, ISO 4014, and DIN 931 referenced.
High-cycle fatigue analysis, S-N Wöhler curves, Marin modification factors, Goodman failure criterion, and Miner cumulative damage rule.
Similar calculators
Explore calculators with similar categories or tags.
Calculate L10 and L10h from C, P, type, and rpm.
Calculate open belt length, small pulley wrap angle, and tension allowance checks from pulley diameters and center distance.
Bending stress and max deflection for a simply supported beam.
Calculate stress area and preload from nominal diameter, pitch, and grade.