Engineering unit systems and conversion guide
Engineering guide for conscious use of SI, metric, and imperial units, preventing calculation errors, and maintaining consistent technical documentation. ISO 80000 and ASTM SI10 referenced.
Doc version: 1.1.0 | Updated: 2026-10-16
DimensionCheck: [L]^a · [M]^b · [T]^c · [I]^d · [Θ]^e | P = T · ω | F = m · a | Q = k · A · ΔT / LLast updated: 2026-10-16
References
Assumptions
Guides
Browse guides with similar tags.
Engineering guide for conscious use of SI, metric, and imperial units, preventing calculation errors, and maintaining consistent technical documentation. ISO 80000 and ASTM SI10 referenced.
Engineering guide on 1D/2D tolerance stack-up analysis: Worst-Case, Root Sum of Squares (RSS), Six Sigma limits, and process capability (Cp, Cpk) under ASME Y14.5.
Similar calculators
Explore calculators with similar categories or tags.
Materials, threads, friction, and unit cheats in one page.
Estimate heat flow through a single layer with manual inputs.
Summary of coating types and corrosion protection.
Quick calculations for Reynolds, pressure loss, and duct velocity.
Validate variables, units, and formulas on one screen.
Use symbols defined above. You can write P = T * w.
Computed unit: (N m) / s
Save this calculation to a local project or export inputs/outputs.
Exports inputs and outputs only.
Smart checks, ranges, and next-step suggestions based on your inputs.
Generate a report
Create a report output to document this calculation.
Sweep one variable from min to max and plot the result.