Bearing Life (L10)
Calculate L10 and L10h from C, P, type, and rpm.
Generate an F-x chart from spring constant and displacement.
Enter spring stiffness and maximum displacement. The curve is generated automatically.
Review step-by-step what was done, how it was calculated, and what the result means.
1. What was done?
Generated discrete F-x evaluation points based on spring stiffness and maximum displacement.
2. How was it calculated?
Formula
F = k * x
3. What does the result mean?
10.000 N
This represents the maximum reaction force at the specified peak displacement.
Formulas used
F = k * x
Variables
Usage notes
Sample Evaluation Points
| x [mm] | F [N] |
|---|---|
| 0.00 | 0.00 |
| 4.00 | 2.00 |
| 8.00 | 4.00 |
| 12.00 | 6.00 |
| 16.00 | 8.00 |
| 20.00 | 10.00 |
After checking the basic result, open sharing, PDF, method notes, and comparison panels.
Similar calculators
Explore calculators with similar categories or tags.
Calculate L10 and L10h from C, P, type, and rpm.
Calculate open belt length, small pulley wrap angle, and tension allowance checks from pulley diameters and center distance.
Bending stress and max deflection for a simply supported beam.
Calculate stress area and preload from nominal diameter, pitch, and grade.
Doc version: 1.1.0 | Updated: 2026-10-15
Enter spring stiffness and maximum displacement. The curve is generated automatically.
Review step-by-step what was done, how it was calculated, and what the result means.
1. What was done?
Generated discrete F-x evaluation points based on spring stiffness and maximum displacement.
2. How was it calculated?
Formula
F = k * x
3. What does the result mean?
10.000 N
This represents the maximum reaction force at the specified peak displacement.
Formulas used
F = k * x
Variables
Usage notes
Sample Evaluation Points
| x [mm] | F [N] |
|---|---|
| 0.00 | 0.00 |
| 4.00 | 2.00 |
| 8.00 | 4.00 |
| 12.00 | 6.00 |
| 16.00 | 8.00 |
| 20.00 | 10.00 |
After checking the basic result, open sharing, PDF, method notes, and comparison panels.
F = k · x | x [m] = x_mm / 1000 | Step size = x_max / (steps − 1)Last updated: 2026-10-15
References
Assumptions
Guides
Browse guides with similar tags.
Comprehensive engineering guide on helical compression spring rate k, deflection, Wahl stress correction, solid length, and fatigue limits under EN 13906-1.